Check valve check valve
| Characteristic parameters | Material | Weight |
| Maximum working pressure up to 3000 psig (207 bar) 接口形式為：NPT螺紋，卡套式接頭 Interface: NPT thread, sleeve type joint 規格：6mm，10mm，12mm，18mm , 1/8”，1/4”，3/8”，1/2”，3/4”，1” Specification: 6mm, 10mm, 12mm, 18mm, 1/8, 1/4 "," 3/8 "," 1/2 ", 3/4, 1" | Sealing material: 密封材料 選型編號 適用溫度 ( °C ) Sealing material selection of suitable temperature (~ C). Viton® - VI -23 ~ 190 Viton - VI -23 - 190 丁晴橡膠 - BU -23 ~ 121 Ding Qing rubber - BU -23 ~ 121 乙丙橡膠 - EP -45 ~ 148 Ethylene propylene rubber EP -45 ~ 148 氯丁橡膠 - NE -40 ~ 121 Chloroprene rubber NE -40 ~ 121 Kalrez® - KZ -23 ~ 190 Kalrez - KZ -23 - 190 |
Characteristic:
Maximum working pressure up to 3000 psig (207 bar)
Interface: NPT thread, sleeve type joint
Specification: 6mm, 10mm, 12mm, 18mm, 1/8, 1/4 "," 3/8 "," 1/2 ", 3/4, 1"
Sealing material selection of suitable temperature (~ C).
Viton® - VI -23 ~ 190
Ding Qing rubber - BU -23 ~ 121
Ethylene propylene rubber EP -45 ~ 148
Chloroprene rubber NE -40 ~ 121
Kalrez - KZ -23 - 190
型號
通徑 (mm)
CV
連接形式
尺寸 (mm)
進氣
出氣
A
B
C (Hex Flat)
D (Hex Flat)
SS-CV11-TF6M
4.8
0.47
6 mm GENLOK
60.5
25.0
14.0
15.9
SS-CV12-TF10M
7.1
1.48
10 mm GENLOK
64.0
24.9
19.0
17.5
SS-CV13-TF12M
9.9
1.70
12 mm GENLOK
77.0
32.8
22.0
23.8
-
RW86 high voltage regulator
-
asdasddsds
Maximum operating pressure of 3000 psig, for the connection between the cylinder and the pressure reducer, can also be used for bus system
型號
接頭螺紋
-
Check valve check valve
Characteristic:
Maximum working pressure up to 3000 psig (207 bar)
Interface: NPT thread, sleeve type joint
Specification: 6mm, 10mm, 12mm, 18mm, 1/8, 1/4 "," 3/8 "," 1/2 ", 3/4,
Sweep more surprise